windowsServer2008R2

Migrating Active Directory Domain Controller from Windows Server 2003 SP2 to Windows Server 2008 R2

Organizations are migrating their Windows Server 2003 to Windows Server 2008 R2 Domain Controllers because of the new cool features of Windows Server 2008 R2. There are two options for migrating windows 2003 to Windows Server 2008 R2 Domain Controller.

1. Directly Upgrading to Windows Server 2008 R2 on same physical machine, which is not recommended?

2. Migrating specific domain controller functionality to the new windows Server 2008 R2 Active Directory Domain environment using new hardware, which is the best option for migrating Active Directory Domain Controller from Windows Server 2003 to Windows Server 2008 Domain Controller.

The prerequisites for migrating to Windows Server 2008 R2 in a new hardware are as follows:

1. Existing Windows Server 2003 domain controller must be Windows Server 2003 SP2 or higher.

2. Domain and forest functional levels must be that of Windows Server 2003:

  i.) Open Active Directory User s and Computers, Right Click On msservpero.com and click Raise Domain Functional Level and check Current domain functional level.

 ii.) Open Active Directory Domains and Trusts, Right Click on Active Directory Domains and Trusts and Click Raise Domain Functional Level and check Current forest functional level.

3. Forest and Domains must be prepared Using adprep.  In Windows Server 2003 Domain Controller, Run Adprep /forestprep and Adprep /domainprep /gpprep  from the Windows Server 2008 R2 installation DVD \support\adprep folder.

i.) Insert the Windows Server 2008 R2 DVD into the DVD drive of the Windows Server 2003 SP2 Server.

ii.) Click Start , Click Run , and then type CMD and Click OK.

Related Post  How to Backup Active Directory Domain Services Database in Windows Server 2012 R2

iii.) In the command prompt, type the following commands and press enter.

iv.) After Forest preparation is completed successfully, run the Domain preparation command.

v.) Check the Schema version of AD.
       Before Adprep:

After Adprep:

4. Promote a New Windows Server 2008 R2 server to a domain controller, including DNS and global catalog.

Now Our Windows Server 2003 SP2 Active Directory is ready for Windows Server 2008 R2 Domain Controller. To set up an Additional Domain Controller, please look my previous article on “Creating Additional Domain Controller for an Existing Domain.”

5. Transfer all operations master roles to the new domain controller.

i.) Log on KTM-DC01-2K8 new domain controller, Click Start, Click Run, and type cmd and Click OK.

ii.) Verify the FSMO Roles on Windows Server 2003 SP2 Server before we transfers FSMO roles to new Windows Server 2008 R2 Server.

iii.) In the command prompt, type ntdsutil and press enter.

iv.)Type roles and press Enter. The  prompt will display “fsmo maintenance:”

v.) Type connections and press Enter. The prompt will display “server connections:”

vi.) In the “server connections: “, type  connect to server KTM-DC01-2K8.msserverpro.com and press enter ( where KTM-DC01-2K8  is the name of the target Windows Server 2008 R2)

vii.) Type quit and press enter. The prompt will display “fsmo maintenance:”

viii.) In the “fsmo maintenance:” type “?” for help

ix.) In the “fsmo maintenance: “ , type transfer schema master and Press enter  and Click Yes On Role Transfer Confirmation Dialog box to confirm the Operations Master  change.

Related Post  Resetting the Directory Services Restore Mode (DSRM) Password in Windows Server 2012 R2

x.) Do the same process for : transfer  naming master, transfer PDC, transfer RID master and   transfer infrastructure master.

xi.) Type quit and press enter; the type quit and press enter again to exit the ntdsutil.

xii.) Verify the FSMO Roles on new Windows Server 2008 R2 Domain Controller.

6. Demote the Windows Server 2003 domain controller.

i.) On KTM-DC01-2K3, Click Start, Click Run, type dcpromo and then click OK.

ii.) On the Welcome to the Active Directory Installation Wizard page, Click Next.

iii.) On the Active Directory Installation Wizard dialog box, Click OK.

iv.) On the Remove Active Directory page, leave This server is the last domain controller in the domain unchecked and then click Next.

v.) On the Administrator Password Page, type P@ssw0rd in both password textboxes and click Next.

vi.) On the Summary page, click Next. Wait for the process to complete and then click Finish.

vii.) On the Active Directory Installation Wizard dialog box, click Restart Now to Restart the server.

7. Now disjoin Windows Server 2003 SP2 from the domain to a workgroup. Fresh Install Windows Server 2008 R2 and join the domain. Then Upgrade the server to a domain controller and transfer required FSMO roles back to the system.

Summary:

Finally, we  successfully Migrated Active Directory Domain Controller from Windows Server 2003 SP2 to Windows Server 2008 R2, which is an easy process. I hope this article will help you in the near future when you are migrating from Windows Server 2003 to 2008 R2 Domain Controller.

virtual dedicated server, computer servers, windows server 2003, server windows, dedicated server, low cost dedicated server, servers, dedicated hosting solutions, windows 2003 server, dedicated hosting server, windows dedicated server, linux server, dedicated windows server, canada dedicated server, server, amd server, blade server, small business server, cheap dedicated server, custom servers

Related Post  Configuring Fine-Grained Password Policies in Windows Server 2008 R2

5 comments

Leave a Reply to Raja Ram Maharjan Cancel reply

Your email address will not be published. Required fields are marked *